PC Gaming

[Bogo36]

PC is here and it's alive

Spoiler

View attachment 329226View attachment 329227View attachment 329228

Haven't figured out yet how to control the RGBs.

Signal RGB can change the RAM colour but doesn't give me any option to change the Arctic Fans or the Zotac Logo. Any ideas?

And tell me about the Fan Curves now @Bogo36

Nice!
I use Signal RGB for everything. Its a little bit hard to configure at first, but its awesome.

For the fan curves: It depends how far away your pc is standing.
In the Bios you have to find out which device is connected to which pwm port.
Just tune the curve high and you will see/hear which device is which.




For the Pump i use a almost flat 30% curve. Im a silent freak 😅
If it doesnt bother you, you can go for a flat 40% curve. You almost wont benefit from everything above 40%. Some users on the Hardwareluxx forum tested this.





This is my curve for the Radiator Fans. You can adjust this to your likings.

For the VRM Fan on the pump, just use a flat curve. Go as low untill the fan is inaudible for you. This one is not so important.
For all the Case fans you can try it for yourself. It isnt that hard. I dont use the CPU Temperature for the Case fans because the CPU temperature can have some spikes and this causes the fans to spin up briefly and then go back down again. I use a PCIE sensor on my Board because the temperature fluctuates less on this sensor and so are the case fans.

 

[Cesc Fabregas]

Nice!
I use Signal RGB for everything. Its a little bit hard to configure at first, but its awesome.

For the fan curves: It depends how far away your pc is standing.
In the Bios you have to find out which device is connected to which pwm port.
Just tune the curve high and you will see/hear which device is which.


View attachment 329247

For the Pump i use a almost flat 30% curve. Im a silent freak 😅
If it doesnt bother you, you can go for a flat 40% curve. You almost wont benefit from everything above 40%. Some users on the Hardwareluxx forum tested this.



View attachment 329248

This is my curve for the Radiator Fans. You can adjust this to your likings.

For the VRM Fan on the pump, just use a flat curve. Go as low untill the fan is inaudible for you. This one is not so important.
For all the Case fans you can try it for yourself. It isnt that hard. I dont use the CPU Temperature for the Case fans because the CPU temperature can have some spikes and this causes the fans to spin up briefly and then go back down again. I use a PCIE sensor on my Board because the temperature fluctuates less on this sensor and so are the case fans.

Thank you for this, PC is running as silent that it doesn't bother me now. Actually only set the Radiators and the pump, rest is fine with the default fan curves for now.

Very happy now, thank you for all your suggestions @Bogo36, @bsmaff & all the other people who gave their opinion about all the components (@Tom, @PRO_TOO, etc.), love you guys ❤️

Now only the back and shoulder pain needs to go away I got from doing all the cable management from the PC and the new Monitors on my desk with my 2-PC setup

 

[bsmaff]

Thank you for this, PC is running as silent that it doesn't bother me now. Actually only set the Radiators and the pump, rest is fine with the default fan curves for now.

Very happy now, thank you for all your suggestions @Bogo36, @bsmaff & all the other people who gave their opinion about all the components (@Tom, @PRO_TOO, etc.), love you guys ❤️

Now only the back and shoulder pain needs to go away I got from doing all the cable management from the PC and the new Monitors on my desk with my 2-PC setup

I am glad you like your new machine...
You had it a couple of days now, so your probably already thinking of upgrades.
OLED monitor, new chair, new desk, new speakers, new headset, maybe a steering wheel.